Flowrox™ pinch valves type PV

The Flowrox PV pinch valve is an open body valve designed for non-hazardous media, lower pressures and operating temperatures. Typical applications are powder, granules and process water. The open body design isolates vibration and tolerates minor misalignments of the pipeline. It is also light-weight and easy to maintain. The PV valve is often used as service valve, isolation valve, process valve or control valve.

Details Technical documentation

Properties

Light weight and easy maintenance
Housing in Carbon steel 1.0619 and Stainless steel AISI 316
To cover a wide range of applications, several rubber qualities are available.
Manual, pneumatic, hydraulic and electric actuator
100 % tight shut-off
Full bore
Low Total Cost of Ownership

Applications

Low pressure and temperature
Non-hazardous media
Abrasive, corrosive and crystallizing media
On/off and control applications

Technical data

DN80 – 1000mm
PN1 – 16bar
Epoxy painted carbon steel or stainless steel
Temperature -50°C to +160°C
Sleeve materiale available in material;
- SBRT = Styrene butadiene
- EPDM = Ethylene propylene
- NR = Natural rubber
- NBR = Nitrile
- CSM = Hypalon
- CR = Chloroprene
- IIR = Butyl
- NRF = Foodstuff natural rubber
- NBRF = Foodstuff nitrile
- HNBR = Hydrogenated nitrile
- FPM = Fluorine rubber
- PU = Polyurethane - /M = Flowrox SensoMate sleeve - /PU = PU-lining - /VAC = Vacuum sleeve

Technical documentation

ATEX 2014/34/EU, on request
2006/42/EC manufacturer's declaration for pinch valves, on request
PED 2014/68/EU Flowrox valves and PED categories, on request
Material certificate 3.1 for valve housing, on request
DIN 50049/2.1 documentation, on request
DIN 50049/2.2 documentation, on request
FDA declaration for NRF and NBRF valve sleeves, on request

Technical table

Body material:	Carbon steel 1.0619 and Stainless steel AISI 316
Manual:	Handwheel
Sleeve:	Standard SBRT rubber, other materials in "technical data" above
Pneumatic actuator:	Aluminum cylinder
Hydraulic actuator:	Steel