| RoHSII : | The material is in compliance with EU directive 2011/65/EU (RoHS II) | Components : | Glass fabric bonded with silicone resin |
|---|---|---|---|
| Color : | White |
Nema L1-1 : | G-7 |
| DIN 7735 : | HGW 2372 (*) |
IEC/DIN EN 60893 : | SI GC 201/202 |
| BS 3953 : | SI-5 |
NF C 26-154 : | VS-2 |
| Mechanical Properties | TestMethod | Value | Unit | Note |
|---|---|---|---|---|
| Flexural strength | ISO 178 | 150 |
MPa | |
| Modulus of elasticity | ISO 178 | 15000 |
MPa | |
| Edgewise notched impact strength Charpy | ISO 179 | 50 |
kJ/m2 | |
| Compressive strength, ll at 23°C, flatwise | ISO 604 | 450 |
MPa | |
| Shear strength // | 20 |
MPa | Test Method: IEC 60893 | |
| Compressive strength, ll at 23°C | ISO 178 | 100 |
MPa | |
| Tensile strength at | ISO 527 | 130 |
MPa | |
| Physical Properties | ||||
| Water absorption after (24h 23°C) | ISO 62 | 26/0,1 |
mg/% | |
| Density | ISO 1183 | 1,85 |
g/cm3 | |
| Flammability | V0 |
Test method UL 94 | ||
| Electrical Properties | ||||
| Insulation resistance, after the immersion in water | IEC 60167 | 1.00E+12 |
Ω | |
| Breakdown voltage //, 90°C in oil | IEC 60243-1 | 75 |
kV | |
| Flatwise electric strength | IEC 60243-1 | 8 |
kV/mm | |
| Comparative tracking index - CTI | IEC 60112 | 600 V |
||
| Arc resistance | 180s |
Test method: ASTM D 495 | ||
| Relative permittivity at 1MHz | IEC 60250 | 4,4 |
||
| Dissipation factor at 1 MHz | IEC 60250 | 0,003 |
||
| Thermal Properties | ||||
| Temperatur index (TI) | IEC 60216 | 180 |
°C | |
| Form of delivery | |
|---|---|
| Sheets format | 1170 x 1070mm 2070 x 1070mm (up to 40mm thickness) |
| Tolerance of formats | +/-30mm |
| Thickness in range | 0,2 to 30mm |
| Thickness tolerances | Acc to DIN EN 60893-3-6 |
| The data mentioned in this data sheet is after our knowledge correct, but we reserve the right to make changes without notice. |
| rev: 09/2021 |
| BAGGES AS, Industriveien 15, 2020 Skedsmokorset - Tlf: +47 64 83 50 00 - www.bagges.no - post@bagges.no |
|---|